# Single/Admin user Interface

**URL:** <https://forum.weaviate.io/t/single-admin-user-interface/4027>\
**Category:** Support\
**Created:** [September 9, 2024, 9:02am UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027 "2024-09-09T09:02:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Univision\_Support](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.weaviate.io/univision_support/32/2100_2.png) [@Univision\_Support](https://forum.weaviate.io/u/Univision_Support)\
**Post date:** [September 9, 2024, 9:02am UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027/1 "2024-09-09T09:02:56Z")

</div>

### Description

Already exists or is planned a single user interface with only chat interface without admin options (configuration, documents tab, ecc…) ?

Thanks

---

<div class="post-metadata">

**Author:** ![DudaNogueira](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.weaviate.io/dudanogueira/32/7846_2.png) [@DudaNogueira](https://forum.weaviate.io/u/DudaNogueira)\
**Post date:** [September 9, 2024, 2:32pm UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027/2 "2024-09-09T14:32:33Z")

</div>

hi @Univision_Support !!

Are you referring to Verba?

There is a Production mode in Verba, where you can remove those options and leave the UI only with the querying part.

I will try to play more with Verba 2.0 later this week.

Let me know if this helps!

Thanks!

---

<div class="post-metadata">

**Author:** ![Univision\_Support](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.weaviate.io/univision_support/32/2100_2.png) [@Univision\_Support](https://forum.weaviate.io/u/Univision_Support)\
**Post date:** [September 10, 2024, 8:55am UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027/3 "2024-09-10T08:55:39Z")

</div>

Hi, Thanks for the reply, Yes I was referring to Verba (I test last version Verba 2.0).

I try with “verba start --prod” but don’t work.  
The call is correct?

I see also “–deployment” options it possible start directly in local mode?

---

<div class="post-metadata">

**Author:** ![wjbmattingly](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.weaviate.io/wjbmattingly/32/2473_2.png) [@wjbmattingly](https://forum.weaviate.io/u/wjbmattingly)\
**Post date:** [October 8, 2024, 6:21pm UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027/4 "2024-10-08T18:21:36Z")

</div>

I had this same issue. The trick here is to use this in your .env:

VERBA\_PRODUCTION=“Demo”

and then run verba start --prod and it should work where you don’t see admin settings.

---

<div class="post-metadata">

**Author:** ![DudaNogueira](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.weaviate.io/dudanogueira/32/7846_2.png) [@DudaNogueira](https://forum.weaviate.io/u/DudaNogueira)\
**Post date:** [October 14, 2024, 9:43pm UTC](https://forum.weaviate.io/t/single-admin-user-interface/4027/5 "2024-10-14T21:43:11Z")

</div>

thanks for sharing, @wjbmattingly !

And Welcome to our community 🤗